How to maximize the effect of using the camera rig it?
Video camera's low-angle grip recording and audio recording performance of
the short board is the camera most dissatisfied with the two points, to solve
these two points must use the film camera rig and external microphone to make up. Now
there is a one-of-a-kind solution that meets both of these needs through a
single product.
MicRig form factor is a C-type camera rig, the front is a microphone, the top is the beam, the bottom is the base. Its body is made of ABS plastic, durable and lightweight, with a total load of up to 8 pounds (3.5 kg), enough to carry any SLR / SLR camera, cell phone and sports camera and home DV.
Power: one 1.5V AA battery
Frequency response: 35-20,000HZ+/-3dB
Sensitivity: -35dB+/-1dB/0dB=1V/Pa, 1kHz
Signal-to-noise ratio: 78dB or more
The reserve chute on the bottom plate allows the camera to be positioned in various positions in order to find the most accurate center of gravity for balancing. At the same time the height of the base itself also allows you to let the camera off the ground when the camera down. On the handle can provide a comfortable low-angle shooting position. There is also a cool boot above the handle that can be used to install additional accessories.
Of course, the main function of MicRig is a pair of 9.7mm condenser microphones in X-Y stereo configuration, which can make your camera or mobile phone get better sound quality than the built-in microphone. A single AA battery can be sustained for up to 75 hours, replace the battery is also quite convenient and fast, directly under the handle removable. MicRig's audio module also comes with power supply, high-pass filter and 0 / +10 dB switch, for the photographer to expand the audio recording options.
more information about sevenoak camera stabilizer,camera slider
MicRig form factor is a C-type camera rig, the front is a microphone, the top is the beam, the bottom is the base. Its body is made of ABS plastic, durable and lightweight, with a total load of up to 8 pounds (3.5 kg), enough to carry any SLR / SLR camera, cell phone and sports camera and home DV.
Video Camera Stabilizer with built in microphone MicRig Stereo
Power: one 1.5V AA battery
Frequency response: 35-20,000HZ+/-3dB
Sensitivity: -35dB+/-1dB/0dB=1V/Pa, 1kHz
Signal-to-noise ratio: 78dB or more
The reserve chute on the bottom plate allows the camera to be positioned in various positions in order to find the most accurate center of gravity for balancing. At the same time the height of the base itself also allows you to let the camera off the ground when the camera down. On the handle can provide a comfortable low-angle shooting position. There is also a cool boot above the handle that can be used to install additional accessories.
Of course, the main function of MicRig is a pair of 9.7mm condenser microphones in X-Y stereo configuration, which can make your camera or mobile phone get better sound quality than the built-in microphone. A single AA battery can be sustained for up to 75 hours, replace the battery is also quite convenient and fast, directly under the handle removable. MicRig's audio module also comes with power supply, high-pass filter and 0 / +10 dB switch, for the photographer to expand the audio recording options.
more information about sevenoak camera stabilizer,camera slider
评论
发表评论